Comments on: Making a 3.5mm headphone adapter for the Cingular 3125

By: Locutus

Locutus — Fri, 18 Jul 2008 05:41:06 +0000

I just bought one from eBay. Just put
“Cingular 3125″ headphone adapter
into the search box. They’re out of Hong Kong for $11 shipping included.

By: Leshek

Leshek — Tue, 04 Mar 2008 07:50:27 +0000

TAHNK YOU! Would not have done it without your instructions.

I used the phone part of phone/power cable.

http://www.expansys-usa.com/p.aspx?i=140428&asource=SMARTFLIP_US

There was a difference, took me a while, but the right channel is on black cable there, do not know what red is, but everything else is as described.

So if you use the phonejack part of phone/power splitter:

Black – Right Audio (+ve)
Red/Gold – Left Audio (+ve)
Gold – Audio (-ve)
Red/Green – Audio (-ve)

Cheers…

By: Lewis

Lewis — Thu, 06 Dec 2007 19:50:18 +0000

Hi, i was jsut wondering whether it would be possible if you could make me one and i would send you some money for it.

Contact me at andycandshabba@hotmail.com if this ould be possible.

By: devvon vienna

devvon vienna — Sat, 17 Nov 2007 06:37:00 +0000

hi there. nice job. i would like to know if there is a way to make the SE k610i DCU-60 cable with a 3.5mm stereo adapter. and can you show us how?

By: akaider

akaider — Thu, 15 Nov 2007 19:06:45 +0000

hey i need some of these and im willing to pay some $$ for em just write me up and let me know the price

By: devvon vienna

devvon vienna — Sun, 11 Nov 2007 10:42:44 +0000

hello,
how about making a mini usb to 3.5mm adapter for Sony ericson k610?

By: Andrew

Andrew — Thu, 01 Nov 2007 17:10:38 +0000

I haven’t seen a retail site, but you can find them pretty easily on Ebay;

http://tinyurl.com/2×2vlh

By: justin

justin — Thu, 01 Nov 2007 02:52:33 +0000

does anyone have a link to a site selling the 12 pin to 3.5mm cable that is a meter long, i really wouldnt mind the length its for a car application.

By: robert

robert — Sun, 28 Oct 2007 06:08:58 +0000

It not too bad, I have very little soldering experience and I made one that works well. I made the cuts after the volume module in order to retain mic functionality (havent tested that yet though) Soldering is not absolutely necassary but disirable for a steady connection. Once the cover is removed from each internal wire watch out for:
1) fine plastic fibers interwoven with the wires. you can seperate them by holding the wire between your fingers and twisting in the opposite way in which they are twined(I forget which way that is). and pulling the fibers away from the fibers.
2) hold a flame beneath the colored wires to remove the coating that covers the headphone wire(not too close or you’ll burn the fine strands). Ensure that uncoated wire does not come in contact with other uncoated wires.

By: tom

tom — Thu, 04 Oct 2007 00:37:13 +0000

thanks man